Operating, Maintaining and Safely Using Your Electrostatic Gun


Operators play a key half within the success of any handbook electrostatic utility. Like all finishers the operators should use sound spraying methods. This consists of correct gun to half distance, correct spray gun angle, correct overlapping methods, correct gun triggering and keep away from extreme gun waving. Operators ought to verify the coatings’ viscosity, know and verify the weapons’ stream fee, set and verify the atomizing pressures and the spray sample, be certain that the electrostatic gun is working, and verify periodically for movie construct consistency through the use of a moist movie thickness gauge.

For their very own security it’s required that the operators have to be positively grounded. Using electrostatic weapons requires that the operator keep pores and skin contact between his hand and the electrostatic gun, because the deal with is positively grounded. This may be achieved by chopping a small gap within the palm of the glove.

As well as, some firms be certain that the ground is a conductive floor and a few operators use particular leg straps that go across the leg and across the exterior of their footwear. Since our our bodies are conductive it’s attainable for the operator to construct up a major cost if they don’t seem to be grounded. This might result in a static discharge that might trigger combustion or an explosion if the operator reaches right into a can of solvent for instance.

Since each the operator and the half to be sprayed are each positively grounded it’s attainable for the operator to be a goal for the charged particles which may lead to a number of overspray ending up on the operator. For that reason it is suggested that the operator holds the gun 7mm-08 ammo for sale  as distant from his physique and ensures that the half is nearer to the top of the gun then his physique is to the top of the gun.

It will assist preserve the coating going to the half and never in the direction of the operator. Nevertheless, the gun shouldn’t be held to shut to the half as this will lower the voltage on the gun which is able to scale back the switch effectivity. Examine the directions that got here together with your gun or ask your gear provider for the beneficial gun to half distance.

Different points that have an effect on the efficiency of handbook electrostatic gun functions are gun cleanliness and gun upkeep. If the coating is allowed to construct up on the barrel of the gun the excessive voltage popping out of the gun might be interested in the grounded deal with of the gun. This may trigger the excessive voltage to lower which is able to lower the effectivity. It’s extremely beneficial that the operator makes use of disposable gun covers and replaces them usually.

Along with maintaining the gun clear, electrostatic weapons require a extra diligent upkeep and preventive upkeep than non-electrostatic weapons. Don’t use the gun if air and fluid leaks are current. If the weapons aren’t properly maintained excessive voltage might observe again via the barrel of the gun in the direction of the grounded deal with. This cannot solely quick out the gun however may result in pricey repairs. If an air leak happens the facility provide needs to be turned off. Electrostatic weapons that use compressed air normally use the air to activate and off the excessive voltage. If the gun has an air leak excessive voltage might be exiting the gun though the gun isn’t getting used. This may be harmful. Electrostatic weapons are largely made out of plastic and care have to be taken when assembling and disassembling the components that require upkeep.


Leave a Reply

Your email address will not be published. Required fields are marked *